SUPPLIED TOGETHER WITH VTI RED OPTICAL FIBER · 4 CHANNELS · 20 KM

VTI-GL-100C Distributed Temperature Sensing (DTS) System & Red Optical Fiber

Industrial Raman OTDR fiber optic linear temperature monitoring controller paired with dielectric VTI Red Optical Fiber for 110kV–500kV underground cable corridors, cable tunnels, power transformer windings, and high-current busducts.

Request Engineering Quotation → Download PDF Brochure

What Is the VTI-GL-100C Distributed Temperature Sensing (DTS) System?

Direct Engineering Summary: The VTI-GL-100C DTS is a 4-channel Raman OTDR fiber optic distributed temperature sensing system manufactured by VTI Corp (MST: 0107921571) and always supplied with VTI Red Optical Fiber. It delivers continuous linear thermal profiling up to 20 km (5 km/channel) with ±1.0 °C accuracy, 0.5 m spatial resolution, 16 alarm relays, and Modbus TCP / RS485 SCADA telemetry for 110kV–500kV cables and transformers.

VTI-GL-100C Distributed Temperature Sensing (DTS) Controller Supplied Together with VTI Red Optical Fiber Spools

Core Engineering Highlights

  • Mandatory Paired System: Supplied as a unified kit comprising the wall-mount VTI-GL-100C controller + VTI Red Optical Sensing Fiber.
  • 100% EMI & High-Voltage Immunity: Passive quartz optical fiber contains zero metal conductors, immune to 500 kV electromagnetic interference and partial discharge.
  • Pinpoint Hotspot Localization: 0.5 m spatial sampling resolution and 1.0 m alarm zone resolution across up to 20 km total route length.
  • Autonomous Local HMI & Protection Relays: Integrated 10.4-inch industrial touchscreen, 4 front-panel status lamps (Run, Fault, Pwr, Alarm), and 16 programmable dry-contact relays (250 VAC / 3 A) for direct breaker inter-tripping or fire-suppression activation.

Complete HTML Technical Datasheet — VTI-GL-100C DTS & VTI Red Optical Fiber

Datasheet Specification Summary: Below is the open, crawlable HTML technical specification table for the VTI-GL-100C Distributed Temperature Sensing Controller and its paired VTI Red Optical Fiber, covering optical range (4 × 5 km), metrology accuracy (±1.0 °C), spatial resolution (0.5 m), relay capacity (16 channels), and SCADA protocols (Modbus TCP Port 502, RS485 Modbus RTU).

Specification Parameter VTI-GL-100C DTS Technical Value Engineering Standard / Notes
Model & Manufacturer VTI-GL-100C (Supplied with VTI Red Optical Fiber) Viet Technology and Investment Corporation JSC (VTI Corp — MST: 0107921571)
Optical Sensing Principle Raman Backscatter Optical Time-Domain Reflectometry (OTDR) Intrinsically passive optical fiber, 100% immune to HV EMI/RFI
Optical Channels & Distance 4 Optical Channels × 5 km per channel (Up to 20 km total) Supports multi-zone cable tunnels, busducts & substation feeders
Temperature Measurement Range -40 °C to +120 °C (High-temperature fiber option up to +150 °C / +300 °C) Continuous linear thermal profiling along entire fiber length
Temperature Accuracy & Resolution ±1.0 °C accuracy | 0.1 °C display & telemetry resolution Calibrated for early detection of soil dry-out & cable joint overload
Spatial & Alarm Resolution 0.5 m spot spatial resolution | 1.0 m alarm localization Pinpoints exact cable joint, rack, or tunnel segment overheating
Measurement Cycle Time Configurable from 2 seconds to 60 seconds per channel Rapid dT/dt Rate-of-Rise (RoR) & absolute threshold detection
Local Display & Status Indicators Integrated 10.4-inch industrial color touchscreen HMI + 4 LEDs (Run, Fault, Pwr, Alarm) Local zone mapping, historical temperature curves, and fault logs
Protection Relay Outputs 16 Programmable Relay Outputs (250 VAC / 3 A or 30 VDC / 3 A) Direct hardware inter-trip to fire alarm panels & switchgear relays
SCADA & Industrial Protocols Modbus TCP (RJ45 Ethernet), RS485 Modbus RTU, RS232 Seamless integration with VTI Gateway GW22-D, IEC 60870-5-104 & IEC 61850
Power Supply & Consumption DC 24 V (50 W) or 110–240 VAC (50/60 Hz) substation auxiliary supply Dual redundant power input support for critical substations
Enclosure Dimensions & Mounting 420 × 182 × 580 mm heavy-duty industrial wall-mount / cabinet steel enclosure Operating ambient: -10 °C to +55 °C, 5%–95% RH non-condensing

How Does VTI-GL-100C DTS Complement VTI-TS-22 / VTI-TS-26 Wireless Sensors in 110kV–500kV Substations?

Hybrid Substation Architecture: In modern 22kV–500kV substations and hyperscale data centers, engineers combine VTI-TS-22 (TBR22) and VTI-TS-26 (VTI-TS-26) self-powered wireless sensors (>= 1 A, ±0.2 °C) on bolted busbar joints and disconnector blades with the VTI-GL-100C Fiber Optic DTS along underground power cables and transformer windings, unifying all telemetry into the 4-Layer VTI + DewesoftX CBM Platform.